|
Mount prints
fast & easy
with
Self-stick Boards
For prints up to 20"x30", you can mount them by hand using
our self-stick adhesive boards. To use them, all you
need to do is:
1. Peel back about 1" of the "crack 'n peel" liner to
expose a small amount of the adhesive.
2. Attach the leading edge of your print to the board.
3. Remove the rest of the "crack 'n peel" liner and with
you hand in the center of your print, stick your print to
the board from the leading edge to the end of the poster.
4. Then smooth your print from the center to the edge of
the print
That's all there is to it.
You've
just done what a Kinko's would charge you $30 to do - for
about $5!!
For prints larger than 20"x30" we offer
economical roll machines
to assist the mounting of your print. Choose from
self-stick foam, gator and plastic boards as well as our
new matboard MatMounts.
 Artgrafix
exclusive
Stick-it2me
Boards
Matboard with adhesive
centers.
These are professional
picture framing mat boards with adhesive coated in the
center of the mat board. Sized for photographs and
enlargements, each board has alignment marks printed on
the boards so you know when your photo covers them on all
sides, your print is perfectly centered on the board with the
right amount of mat board exposed to highlight your photo.
Available in off-white, grey and black matboards.
 Our
MatMount Mailing Packages
are the perfect way to send prints. And with the included
self-stick easels, they are ready to display when
received. Great for sharing those new snap shots and
enlargements! Our mailing packages all include a heavy
board envelope which keeps items flat and safe. Choose from
4"x6"(MatMount board is 5"x7"), 5"x7" (MatMount is 8"x10") or
8"x10" photos (MatMount board 11"x14").
 We
also offer our MatMount Plaques
in either Cherrywood or Marble finishes. No tools
required - just slip your MatMount under the plexiglas
protective sheet and your print is ready to hang in a unique
1/2"
thick plaque. It's a look you can't get anywhere else at a
tremendous value.
We have a complete range of
adhesive boards
 for
all your needs. Coated with adhesive over the full surface of
the board, choose either our
repositionable adhesives when alignment is critical
and you don't need an adhesive for extreme conditions, or
hi-tack adhesives for heavy
weight papers. We have stock sizes from 8.5"x11" to
40"x60" to handle all of your project needs and can always
make custom sizes.
We stock a wide range of adhesive
coated boards including
foam boards,
gatorfoam boards as well as
plastic boards.
There is no compromise with these cold or pressure sensitive
adhesives. You'll get the same great professional
results. You'll be a mounting expert from the first time
you try.
Remember, we are always here
to help you succeed!
| 
